Nut & Cable



CC26 comes in both a table-top or ergonomic Z-configuration. The CC26 is built for high-volume Serial Production use. By design, the constant centerline crimping enables easy part-positioning.

The Z-configuration, with the crimping head and hydraulic unit all separate, makes the CC26 ideal for automatic line use. For automation it can be equipped with an optional Automatic Greasing Unit, enabling an interruption-free operation combined with long maintenance intervals and ensuring ultimate accuracy. It also has wiper seal, protecting dirt and debris from entering the cylinder.

Control Models
ICC Standard
Standard Features Options
Electric backstop device
Pressure crimping ICC1
Step crimping ICC2
Foot pedal
Mechanical back stop device
Quality control ICC3
Graphical quality control ICC4
Auto greasing G3
Interface pack ETH (Communication TCP/IP & UDP)
Bar Code Reader BCR
Technical Data
Max crimping dia (mm) ¹ 61
Max crimping dia (inch) ¹ 2.40
Max crimping force (kN) 1300
Max crimping force (tonnage) 130
Cycle time 10 mm (s) ² 2.8
Hose size ID (inch) 1 1/4
Die set series 20
Max. opening (mm) ³ +30
Max opening without dies (mm) 114
Master die D/L (mm) 84/80
Master die D/L (inch) 3.31/3.15
Motor Power (kW/HP) 4/5.5
Oil tank volume 35 l /32 l (Z-model)
Machine (mm) 647x588x745
Machine (inch) 23.6x23.1x29.3
Crimping head (mm) CC26Z 326x608x341
Hydraulic Unit (mm) CC26Z 597x436.5x653
Crimping head (inch) CC26Z 12.8x23.9x13.4
Hydraulic Unit (inch) CC26Z 23.5x17.2x25.7
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10mm cycle.
3) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
DieSetNo D (mm) L (mm) Crimp. range (mm)
18013/10 10 55 10.0-12.0
18013/12 12 55 12.0-14.0
18013/14 14 55 14.0-16.0
18013/16 16 55 16.0-19.0
18013/19 19 55 19.0-23.0
18013/23 23 55 23.0-27.0
18013/27 27 70 27.0-31.0
18013/31 31 70 31.0-36.0
18013/36 36 75 36.0-41.0
18013/41 41 75 41.0-47.0
18013/47 47 85 47.0-54.0
18013/54 54 85 54.0-61.0

In addition to the standard die sets, a wide range of special die sets is available on request.