FP145

Production

FP145

Finn-Power 145 crimping machine is an ideal choice when your operation requires crimping of very long ferrules. The 140-series die system with adaptor dies makes an excellent choice for large, medium and even small fittings. The 145 with 350ton force is a powerful but versatile machine for any shop. Ideal for serial production of 2” 6-wire hydraulic hoses.

Control Models
ICC (7” touchscreen) or
ICC (12” touchscreen) or
SCC (3,5” display + control wheel)
No other models available
Standard Features Options
Pressure crimping ICC1
Step crimping ICC2
QuickChange-tool
Electric backstop device
Mirror
Die racks
Foot pedal
Front table
Quality die rack
Fitting storage
Mechanical back stop device
Auto greasing G3
Oil cooler **
Combi unit (crimping and hydraulic unit combined)
Pinning support mandrel
Horizontal Back layout HB
Horizontal Side layout HS

Remote control (R1, R2)
Quality control ICC3
Graphical quality control ICC4
Interface pack ETH (Communication TCP/IP & UDP)
A3 signal (cable not included)
Bar Code Reader BCR
Speed adjustment **
Oil Condition Monitoring OCM
Industry 4.0
Camera (requires 12” display)
Safety Scanner
** Will have impact on motor size,
hydraulic unit dimensions and weight.
Technical Data
TECHNICAL DATA
Max crimping dia (mm)¹ 124
Max crimping dia (inch)¹ 4.88
Max crimping force (kN) 3500
Max crimping force (tonnage) 350
Cycle time 10 mm (s)² 2.5
Hose size ID (inch)³ 2 ½ (4SH) 2 (6SH) / 4
Die set series 32 / 140 / 145
Max. opening (mm)4 +82
Max opening without dies (mm) 222
Master die D/L (mm) 140/116
Master die D/L (inch) 5.52/4.57
Motor Power (kW/HP) 6.5/8.8
Oil tank volume 135 l
DIMENSIONS (LxWxH)
Machine (mm) 881x683x1561
Hydraulic Unit (mm) 782x751x1063
Machine (inch) 34.7x26.9x61.5
Hydraulic Unit (inch) 30.8x29.6x41.9
WEIGHT (KG/LBS)
Machine 1053/2317
Hydraulic Unit 220/484
1) With standard dies. Crimping range can be increased with special dies.
2) Theoretical with 10 mm cycle.
3) Hydraulic hose / industrial hose
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 145-series
DieSetNo D (mm) L (mm) Crimp. range (mm)
18860/84/120 84 120 84.0-92.0
18860/92/120 92 120 92.0-100.0
18860/100/120 100 120 100.0-108.0
18860/108/120 108 120 108.0-116.0
18860/116/120 116 120 116.0-124.0

In addition to the standard die sets, a wide range of special die sets is available on request.

Die Set 140-series
DieSetNo D (mm) L (mm) Crimp. range (mm)
18860/84 84 110 84.0-88.0
18860/88 88 110 88.0-92.0
18860/92 92 110 92.0-96.0
18860/96 96 110 96.0-100.0
18860/100 100 110 100.0-108.0
18860/108 108 110 108.0-116.0
18860/116 116 110 116.0-120.0
18860/120 120 110 120.0-124.0

In addition to the standard die sets, a wide range of special die sets is available on request.

Die Set 32-series (for 145)
DieSetNo D (mm) L (mm) Crimp. range (mm)
18506/63/120 63 120 63.0-69.0
18506/69/120 69 120 69.0-75.0
18506/74/120 74 120 74.0-80.0
18506/78/120 78 120 78.0-87.0

In addition to the standard die sets, a wide range of special die sets is available on request.

Die Set 32-series
DieSetNo D (mm) L (mm) Crimp. range (mm)
18506/10 10 55 10.0-12.0
18506/12 12 55 12.0-14.0
18506/14 14 55 14.0-16.0
18506/16 16 55 16.0-19.0
18506/19 19 55 19.0-22.0
18506/22 22 70 22.0-26.0
18506/26 26 70 26.0-30.0
18506/30 30 70 30.0-34.0
18506/34 34 75 34.0-39.0
18506/39 39 75 39.0-45.0
18506/45 45 90 45.0-51.0
18506/51 51 90 51.0-57.0
18506/57 57 100 57.0-63.0
18506/63 63 110 63.0-69.0
18506/69 69 110 69.0-75.0
18506/74 74 110 74.0-80.0
18506/78 78 110 78.0-87.0

In addition to the standard die sets, a wide range of special die sets is available on request.