FP20 is the first step towards high scale production with automatic quality control and other advanced options.
FP20 is the powerful little brother of our famous FP120. It’s ideal for high volume production up to 1 1/2” 4-wire hydraulic hoses. It supplied with built-in die storage and Quick Change-tool as standard.
FP20 is available with separate hydraulic unit or as a compact model.
Control | Models | |
---|---|---|
ICC (7” touchscreen) or SCC (3,5” display + control wheel) |
No other models available | |
Standard Features | Options | |
Pressure crimping ICC1 Step crimping ICC2 QuickChange-tool Electric backstop device Mirror |
Foot pedal Mechanical back stop device Interface pack ETH (Communication TCP/IP & UDP) A3 signal (cable not included) Oil cooler ** Combi unit (crimping and hydraulic unit combined) Pinning support mandrel Remote control (R1, R2) Quality control ICC3 Graphical quality control ICC4 Bar Code Reader BCR Speed adjustment ** Oil Condition Monitoring OCM Industry 4.0 ** Will have impact on motor size, hydraulic unit dimensions and weight. |
Technical Data
TECHNICAL DATA | |
---|---|
Max crimping dia (mm)¹ | 61 |
Max crimping dia (inch)¹ | 2.67 |
Max crimping force (kN) | 1500 |
Max crimping force (tonnage) | 150 |
Cycle time 10 mm (s)² | 1.9 (S-model: 1.4) |
Hose size ID (inch) | 1 1/2 (4SH) |
Die set series | 20 |
Max opening (mm)³ | +68 |
Max opening without dies (mm) | 152 |
Master die D/L (mm) | 84/97 |
Master die D/L (inch) | 3.90/3.82 |
Motor Power (kW/HP) | 3.0/4.0 |
Oil tank volume | 135 l |
DIMENSIONS (LxWxH) | |
(mm) | 1112x713x1475 |
(inch) | 43.7x28.0x58.1 |
WEIGHT | |
KG/LBS | 654/1439 |
1) With standard dies. Crimping range can be
increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
18013/10 | 10 | 55 | 10.0-12.0 |
18013/12 | 12 | 55 | 12.0-14.0 |
18013/14 | 14 | 55 | 14.0-16.0 |
18013/16 | 16 | 55 | 16.0-19.0 |
18013/19 | 19 | 55 | 19.0-23.0 |
18013/23 | 23 | 55 | 23.0-27.0 |
18013/27 | 27 | 70 | 27.0-31.0 |
18013/31 | 31 | 70 | 31.0-36.0 |
18013/36 | 36 | 75 | 36.0-41.0 |
18013/41 | 41 | 75 | 41.0-47.0 |
18013/47 | 47 | 85 | 47.0-54.0 |
18013/54 | 54 | 85 | 54.0-61.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.