Finn-Power P20HP is hand pump operated hydraulic crimping machine for repair workshops and service van use. This hand-operated crimping machine works in places where electricity or compressed air are not available.
Available also with air pressure (AP-model).
| Control | Models | |
|---|---|---|
| Manual | AP-model | |
| Options | ||
|
QuickChange-tool Mechanical back stop device |
||
Technical Data
| TECHNICAL DATA | |
|---|---|
| Max crimping dia (mm)¹ | 61 |
| Max crimping dia (inch)¹ | 2.40 |
| Max crimping force (kN) | 1370 |
| Max crimping force (tonnage) | 137 |
| Hose size ID (inch) | 11/2 (2SN) / 11/4 (4SP) |
| Die set series | 20 |
| Max opening (mm)² | +25 |
| Max opening without dies (mm) | 109 |
| Master die D/L (mm) | 84/80 |
| Master die D/L (inch) | 3.31/3.15 |
| Motor Power | Hand pump |
| DIMENSIONS (LxWxH) | |
| (mm) | 487x441x389 |
| (inch) | 19.2x17.4x15.4 |
| WEIGHT | |
| KG/LBS | 66/146 |
1) With standard dies. Crimping range can be increased with special dies.
2) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
| DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
|---|---|---|---|
| 18013/10 | 10 | 55 | 10.0-12.0 |
| 18013/12 | 12 | 55 | 12.0-14.0 |
| 18013/14 | 14 | 55 | 14.0-16.0 |
| 18013/16 | 16 | 55 | 16.0-19.0 |
| 18013/19 | 19 | 55 | 19.0-23.0 |
| 18013/23 | 23 | 55 | 23.0-27.0 |
| 18013/27 | 27 | 70 | 27.0-31.0 |
| 18013/31 | 31 | 70 | 31.0-36.0 |
| 18013/36 | 36 | 75 | 36.0-41.0 |
| 18013/41 | 41 | 75 | 41.0-47.0 |
| 18013/47 | 47 | 85 | 47.0-54.0 |
| 18013/54 | 54 | 85 | 54.0-61.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
