Entry level crimping machine for occational service use
and small workshops. For more demanding crimping needs
please see P20NMS.
Control | Models | |
---|---|---|
MS | No other models available | |
Options | ||
Mechanical back stop device Tool base with QuickChange-tool Tool rack with QuickChange-tool |
Technical Data
TECHNICAL DATA | |
---|---|
Max crimping dia (mm)¹ | 61 |
Max crimping dia (inch)¹ | 2.40 |
Max crimping force (kN) | 1370 |
Max crimping force (tonnage) | 137 |
Cycle time 10 mm (s) ² ³ | 7.0/13.9 |
Hose size ID (inch) | 11/2 (2SN) / 11/4 (4SP) |
Die set series | 20 |
Max opening (mm)² 4 | +25 |
Max opening without dies (mm) | 109 |
Master die D/L (mm) | 84/80 |
Master die D/L (inch) | 3.31/3.15 |
Motor Power (kW/HP)³ | 2.2/3.0 1.5/2.0 |
Oil tank volume | 7 l |
DIMENSIONS (LxWxH) | |
(mm) | 525x515x564 |
(inch) | 20.7x20.3x22.3 |
WEIGHT | |
KG/LBS | 100/243 |
1) With standard dies. Crimping range can be
increased with special dies.
2) Theoretical with 10 mm cycle.
3) 3-phase/1-phase
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
2) Theoretical with 10 mm cycle.
3) 3-phase/1-phase
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 20-series
DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
---|---|---|---|
18013/10 | 10 | 55 | 10.0-12.0 |
18013/12 | 12 | 55 | 12.0-14.0 |
18013/14 | 14 | 55 | 14.0-16.0 |
18013/16 | 16 | 55 | 16.0-19.0 |
18013/19 | 19 | 55 | 19.0-23.0 |
18013/23 | 23 | 55 | 23.0-27.0 |
18013/27 | 27 | 70 | 27.0-31.0 |
18013/31 | 31 | 70 | 31.0-36.0 |
18013/36 | 36 | 75 | 36.0-41.0 |
18013/41 | 41 | 75 | 41.0-47.0 |
18013/47 | 47 | 85 | 47.0-54.0 |
18013/54 | 54 | 85 | 54.0-61.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.