Finn-Power SP-series crimping machines with open C-frame structure are optimal for crimping any odd shape, bent or otherwise complex hose assemblies.
SP100 with 10 ton force is specially designed for small automotive hoses.
SP100 also available in following configurations:
– Z-model with separate crimping head and hydraulic unit
– S-model with enhanced cycle time
– D-model with double head configuration
See details from specific product cards.
| Control | Models | |
|---|---|---|
| ICC (7” touchscreen) | No other models available | |
| Standard Features | Options | |
|
Pressure crimping ICC1 Step crimping ICC2 QuickChange-tool Foot pedal (Standard and S-model) |
Foot pedal (Z-model) Auto greasing G3 Remote control (R1, R2) Quality control ICC3 Graphical quality control ICC4 Interface pack ETH (Communication TCP/IP & UDP) A3 signal (cable not included) Bar Code Reader BCR Auto greasing G3 ICC 12” display |
|
Technical Data
| TECHNICAL DATA | |
|---|---|
| Crimping range (mm) ¹ | 10-46 |
| Crimping range (inch) ¹ | 0.39-1.81 |
| Max crimping force (kN) | 100 |
| Max crimping force (tonnage) | 10 |
| Cycle time 10 mm (s) ² | 1.9 (S-model: 0.9) |
| Hose size ID (inch) | 1 1/4 |
| Die set series ³ | SP100 |
| Max. opening (mm) ⁴ | +11/+62 |
| Master die D/L (mm) | 70/40 |
| Master die D/L (inch) | 2.75/1.58 |
| Motor Power (kW/HP) | 3.0/4.0 |
| Oil tank volume | 50 l |
| DIMENSIONS (LxWxH) | |
| Machine (mm) | 814x782x1670 |
| Machine (inch) | 32.0x30.8x65.7 |
| WEIGHT (KG/LBS) | |
| Machine | 383/844 |
1) With standard dies. Crimping range can be
increased with special dies.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
2) Theoretical with 10mm cycle.
3) See table for die set data.
4) Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
Die Set 100-series
| DieSetNo | D (mm) | L (mm) | Crimp. range (mm) |
|---|---|---|---|
| 701817/10 | 10 | 40 | 10.0-12.0 |
| 701817/12 | 12 | 40 | 12.0-14.0 |
| 701817/14 | 14 | 40 | 14.0-16.0 |
| 701817/16 | 16 | 40 | 16.0-19.0 |
| 701817/19 | 19 | 40 | 19.0-23.0 |
| 701817/23 | 23 | 40 | 23.0-27.0 |
| 701817/27 | 27 | 40 | 27.0-31.0 |
| 701817/31 | 31 | 40 | 31.0-36.0 |
| 701817/36 | 36 | 40 | 36.0-41.0 |
| 701817/41 | 41 | 40 | 41.0-47.0 |
| 701817/47 | 47 | 40 | 47.0-54.0 |
In addition to the standard die sets, a wide range of special die sets is available on request.
